Four-Port USB to Serial RS-232/422/485 Adapter
- This product has been discontinued. Please contact us for help in finding a suitable replacement.
- Great News! ACCES has designed the replacement for this discontinued product. Just a click away to the USB-FLEXCOM4!
- Four-port serial communications adapter for USB 1.1 and USB 2.0 host ports
- Supports field selectable RS-232, RS-422 or RS-485 protocols, per port
- Includes type FT232 UART with 384-byte receive/128-byte transmit FIFO buffers
- Speeds up to 921.6Kbps for RS-422/485 and 230Kbps in RS-232 mode
- Power and individual port activity LEDs visible at front panel
- All required power drawn from USB port, no external power adapter required
- Compact, low profile enclosure
- Designed, made, supported, and manufactured in the USA
- Available as RS-232 and RS-422/485 only versions
- Rugged steel enclosure with attractive powder coat finish and anti-skid bottom
- DIN rail bracket for industrial environments
- RoHS Available. Please contact us for ordering information
The unit enclosure is 7.5 inches wide by 4.35 inches deep by 1.2 inches high. The adapter is supplied with a 6 foot USB cable and has four male DB9 connectors with jack-screws for secure cable connections. The DB9 and USB connectors are conveniently located at the back of the unit and the front panel features an easy-to-read LED display indicating serial port activity and USB status. Port protocol is configured by opening the enclosure and configuring jumpers on the circuit board.
Type FT232 UARTs are used as asynchronous communication elements. This includes 384-byte receive / 128-byte transmit FIFO buffers for high data throughput and to protect against lost data in multitasking systems.
Crystal oscillators located on the card permit precise baud rate capability up to 230.4K for use in RS-232 mode, using ICL3243 type drivers. Speeds up to 921.6K are achievable using RS-422 & RS-485. The driver/receivers used are type SP491 which are capable of driving long communication lines at high baud rates. They can drive up to ±60 mA on balanced lines and receive inputs as low as 200 mV differential signal superimposed on common mode noise of +12V to -7V. In case of communication conflict, the driver/receivers feature thermal shutdown.
- Point of Sale (POS) Retail
- Industrial Automation and Control
- Data Acquisition
- Serial Instrumentation
- Laboratory Research
- Remote Access
- Data Collection
SoftwareA Complete Software Support Package is provided including an easy to use terminal program for testing out your COM ports. This package contains sample programs and source code in Visual Basic, Delphi, C++ Builder, and Visual C++ for Windows. Also incorporated is a graphical setup program in Windows. The adapter installs as Standard COM ports in all Windows and Linux operating systems. Supported operating systems include Windows, Linux, WinCE.net, Mac OS-8, OS-9, OS-X. Use in other operating systems may also be supported, contact Factory.
Drivers and Downloads
ACCES also offers Custom Software Services for our products. Our prices are unbelievably low, often as inexpensive as free! If you need something tweaked to support your needs, or an entire enterprise application developed from scratch, it is definitely worth your time to inquire with us, first.
Further information about available ACCES Software:
- Redistributing Windows Drivers
- A list of ACCES drivers and the files that compose them under different versions of Windows, so you can easily redistribute ACCES cards and drivers.
- I/O Connections: There are 9 pins per port including common grounds. All RS-232 signals are supported and present at the DB9 connectors.
- RS-422 data signals – Tx+, Tx-, Rx+, Rx-, GND
- RS-485 data signals – 2 wire: Tx/Rx+, Tx/Rx-, GND
4 wire: Tx+, Tx-, Rx+, Rx-, GND
Jumper selectable termination
- Serial Data Rates: Up to 230.4K bps, asynchronous for RS-232
Up to 921.6K bps, asynchronous for RS-422 & RS-485
- Multidrop: Compatible with RS-485 specifications. Up to 32 drivers and receivers allowed on line. Driver / Receivers used are type SP491.
- Character Length, Parity and Stop Interval: 5,6,7, or 8 bits; Even, odd, or none; 1, 1.5, or 2 bits
- Receiver Sensitivity: ±200 mV differential input
- Common Mode Voltage: +12V to -7V
- Transmitter Output Drive: 60 mA with thermal shutdown
- Termination: Jumper selectable per channel for RS-485 mode
- Bias: On-board from factory on transmit lines for RS-485 & RS-422
- USB 2.0 and 1.1 compatible
- Operating Temp: 0 to +70°C
- Storage Temp: -50 to +120°C
- Humidity: 5% to 95% RH, non-condensing
- Power: +5 VDC supplied from USB
- Size: 7.5"wide (184.4mm) by 4.35"deep (110.5mm) by 1.16" high (29.5mm)
- This product is designed to be in full compliance with CE requirements.
|USB-COM-4SM||4 port USB to RS-232/422/485 serial adapter|
|USB-COM-4S||4 port USB to RS-422 /485 serial adapter|
|USB-COM232-4||4 port USB to RS-232 serial adapter|
|Options (call for pricing)|
|-OEM||board only version (no enclosure)|