 |
|
Every product in our USB/104 data acquisition product line now supports user-configured and factory-default settings at power-on / reset. These settings include port direction and output level on digital bits, but also counter mode and load values, DAC range and output values, etcetera - most anything you can set, you can set as the default for use at the next reset.
Additionally, all of these cards support an application-level watchdog: if your software fails to communicate with the device as often as you've configured, all signals will revert to your preferred "fail-safe" state. |
|
Every USB/104 data acquisition board with
even a single digital input now supports reading a debounced version of those input signals - with user configurable debouncing time constants.
All of these digital inputs can also be read in latched form - high latch, low latch, and clock latched signals are all available on all bits at all times, with user configurable clock rates. |
|
Every USB/104 data acquisition board with even a single digital output can configure some or all of those outputs to generate square waves with arbitrary duty cycle - from less than 0% to 100% in increments of less than 0.5%, without any CPU or USB transactions once started.
Additionally, a new feature we're calling "Matrix Mapping" allows any output to track the state of any input - with optional inversion - with the operation occurring on user-selected clock intervals - no CPU or USB transactions involved. |
|
|
